Spesifikasi-Icom 2300h

General

Frequency coverage	USA version		TX: 144–148MHz, RX: 136–174MHz*
	EXP version		TX/RX: 136–174MHz*
	KOR, TPE versions		TX/RX: 144–146MHz
Number of channels			207 channels (including 6 scan edges, and 1 call)
Type of emission			F2D, F3E (FM)
Power supply requirement			13.8V DC ±15%
Current drain	Tx (65W)		11A
	Rx	Stand-by	0.4A
		Max. audio	1.5A
Antenna impedance			50Ω (SO-239)
Operating temperature range			–10°C to +60°C; 14°F to +140°F
Dimensions (projections not included; W×H×D)			140×40×162 mm; 5.51×1.57×6.38 in
Weight (approx.)			1.1 kg; 2.43lb

* Guaranteed range TX/RX: 144–148MHz

Transmitter

Output power* (at 13.8V DC)	USA, EXP versions	65W, 25W, 10W, 5W
	KOR version	50W, 25W, 10W, 5W
	TPE version	24W, 10W, 5W
Max. frequency deviation	Wide	±5.0kHz
	Narrow	±2.5kHz
Spurious emissions		Less than –60dBc
Frequency stability		±3ppm
Microphone impedance		600Ω (8-pin modular)

* Output power differs depending on version and specific regulatory requirements.

Receiver

Intermediate frequencies		46.35MHz/450kHz
Sensitivity at 12dB SINAD		Less than 0.18μV
Adjacent channel selectivity	Wide	More than 6kHz (at 6dB) Less than 14kHz (at 60dB)
	Narrow	More than 3kHz (at 6dB) Less than 9kHz (at 55dB)
Spurious response rejection		More than 60dB
Audio output power		4.5W typ. (10% dist. 4Ω load)
External speaker connector		2-conductor 3.5 (d) mm (1⁄8ʺ)/4Ω

Applicable U.S. Military Specifications

Icom makes rugged products that have been tested to and passed the following MIL-STD requirements and strict environmental standards.

Standard	MIL 810G
	Method	Procedure
Low Pressure	500.5	I, II
High Temperature	501.5	I, II
Low Temperature	502.5	I, II
Temperature Shock	503.5	I-C
Solar Radiation	505.5	I
Vibration	514.6	I
Shock	516.6	I, IV

Also meets equivalent MIL-STD-810-C, -D -E and -F.
All stated specifications are subject to change without notice or obligation.